Multi-function submersible Fish pump 24W 40W 55W 60W 85W 220VAC/50Hz Fish tank pump cooling water pumps(MQB-2000)

Pumps & AccessoriesPREFACEThank you for your purchasing MQB series submersible pumps. This series adopt special motors,reasonable constructures and personalized design.It is very convenient for you to use,equip and maintain them.In order to better use the series and protect you from the danger,please look through this instruction carefully before using the series and keep it well for your future reference.FEATURESThis series have been equipped with thermal protectors in order that the motors will be able to cut off the power automatically once the motors get too while their working;The shells and the parts connecting with outer environment have adopted the materials against acids & salinealkali;The series are amphibious pumps.The series have lower electric consumption and longer life expectancy due to the special motors and scientific design;The series have allocated various connecting ways in order to connect with different tubings.APPLICATIONSIt is power head that can be used as aquarium's filter and skimmer in the aquarium scaping .fountains,channels falls,etc;Can be used in the water circulation of seafood farming ponds and aquariums;Can be used in watering flower and cleaning the equipment;Can be used to supply and discharge the sea water or the water full of acids & saline alkaliINSTRUCTIONS FOR USEWhen using the seriesfirstly choose the proper to contect with shells firmly and later connct with the tubing.Both the and the tubing must be mingled by the clamp.lf you use the serieson the flat or on the walls,please equip the series with the rubber feet.After fastening the series,you can use the pumps.When using the series on the land, firstly take away the black cover in front of the filtering casing.find out the outlet/inlet and then Connect them with the tubing. While the pumps' working.The tubing will contract.it requires that the length of the tubing' conecting part must be at most 30 cm. If you set the soft tubing as the transportation, please choose the one whichwill tie uneasily deformed.When using the series on the land, please pay attention whether theconnecting is leak.If there is some bubbles in the Water.that shows the seal is not good.And those bubbles will shorten the pumps' life expectancy. Before using, you should put the pumps under the water level and make sure there is some Water left in the pumps. Or else, the pumps will be damaged while working.NOTESMust be used in the water.Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.WARNINGSMake sure the voltage and frequency you use are the same as theones onted in the pumps' namepaltes;Make sure the medis's temperature is between 0 and 35 ;While you carry the pumps,please hold the handles;If you add the length of the power wire,please make sure the its seal and put it in the position where there is no water;Must connect the pumps with the earth while using them.If the pumps work without water,they will get easily damaged;Mustn't be used in the media full of iron;While using the series in the pond or brook,please put them in the position where there is less sand.If the pumps work wrongly,please maintain it atter cutting off the electricity.Please clean the bearing and filtering casing regularly.While dismantling the series,please pay attention to the safety in the process of putting the impellers because the impellers have the magnetic.Mustn't be used in the media of saline- -alkali.After the engine restarted,you should check whether the pump working or not.Size:

• Pumps & Accessories
• Multi-function submersible Fish pump 24W 40W 55W 60W 85W 220VAC/50Hz Fish tank pump cooling water pumps