Leveling Lift Kit/Spacers 40mm /1.6" Left & Right for Front Strut & Rear Coil Spring Spacers in Polyurethane PU - Compatible with RAV4 (XA30 / A3) 2006-2012, RAV4 (XA40 / A4) 2013-2018

AUTOACER 10-Piece Front and Rear Leveling Lift Kit with 40mm Polyurethane Spacers is designed for compatible RAV4 vehicles and includes front strut spacers and rear coil spring spacers used to raise the vehicle’s ride height. This suspension spacer kit is manufactured from high-grade polyurethane and is designed to install between the suspension components to provide additional clearance while maintaining the factory suspension structure. The kit includes front strut spacers, rear coil spring spacers, and extended mounting bolts required for installation. These components are designed as direct replacement suspension spacers that mount within the original suspension assembly without drilling or permanent modification. This leveling lift spacer kit is compatible with 2006–2012 RAV4 (XA30 / A3 – 3rd Generation) and 2013–2018 RAV4 (XA40 / A4 – 4th Generation). The spacers are designed for use within the front strut assembly and rear coil spring suspension system to provide approximately 40mm (1.6 inch) of additional suspension spacing. Suspension spacer lift kits are commonly used to increase ground clearance, accommodate larger tires, or restore suspension height on vehicles with worn springs. The kit contains ten components including two front polyurethane strut spacers, two rear polyurethane coil spring spacers, and six longer mounting bolts designed to replace original strut bolts when installing the spacers. Polyurethane construction is commonly used in suspension spacer kits due to its resistance to corrosion, deformation, and weather exposure compared to standard rubber components. The spacers are designed to sit securely within the suspension mounting locations when installed correctly and aligned with the strut or spring assembly. Professional installation is recommended when installing suspension lift spacers. During installation the front strut assembly and rear coil spring assembly must be loosened or removed in order to position the spacers properly within the suspension system. After installation all suspension fasteners should be tightened to the manufacturer’s torque specifications and a wheel alignment should be performed to ensure proper suspension geometry and tire wear. AUTOACER provides a 5-year manufacturer warranty covering manufacturing defects for this polyurethane suspension spacer lift kit designed for compatible RAV4 vehicles.

• Kit Includes: 2 Front Polyurethane Strut Spacers (40mm / 1.6"), 2 Rear Polyurethane Spring / Coil Spacers (40mm / 1.6"), and 6 Extended Strut Bolts (Left & Right).
• Vehicle Compatibility: Compatible with RAV4 2006 2007 2008 2009 2010 2011 2012 (XA30 / A3 – 3rd Generation) and RAV4 2013 2014 2015 2016 2017 2018 (XA40 / A4 – 4th Generation).
• ASSEMBLY NOTES: Professional Installation Required - This product should be installed by a professional mechanic. Pressing in and installing levelling kits requires specialized tools to ensure proper fitment. Incorrect installation may result in premature wear or suspension damage.
• Replacing the Polyurethane Coil Spring Spacers: These polyurethane spacers must sit on top of your springs as shown in the picture above. Loosen the spring and dismount it from the car. Remove the stock rubber pad and replace it with the polyurethane spacer. Install same way inside the spring. Now loosen the rubber bushings of the suspension arms and tighten them again. Tighten all bolts and fasteners to the manufacturer’s torque specifications.
• Replacing the Polyurethane Strut Spacers: Position spacers securely on your struts as shown in the graphic picture above. Unscrew the strut mount plate, replace the bolts from the mounts with the new longer screws included. Align the spacers holes with the strut bolts and firmly push until it snaps securely into place. Ensure they are properly seated before re-assembling any components. Tighten all bolts and fasteners to the manufacturer’s torque specifications.
• Made from High-Strength Polyurethane: These spacers are stronger and more durable than standard rubber alternatives and will not rust or corrode over time. Polyurethane components may require occasional lubrication to help maintain smooth performance and extend service life.
• Alignment Required: A professional wheel alignment is required after installation to ensure correct suspension geometry, proper tire wear, and safe handling.
• Enhanced Handling: Designed to boost handling and stability during cornering, supporting a more balanced and controlled driving performance.
• Vehicle Stability Support: Designed to help maintain vehicle stability and assist with control during driving, contributing to a smoother driving experience across different road conditions.
• Quality Assurance: AUTOACER is committed to providing high-quality products and exceptional customer support for any issues related to manufacturer defects.