Clamp-On Leakage Current Meter High Precision Clamp Leakage Current Meter AC Current Measurement with Measure Range 0mA to 600A 1mA Resolution AC Leakage Current Clamp Meter RS232

Specification Function：Measurement of AC leakage current, AC current and on-line measurement Power：Zn-Mn dry battery,6F22,9V Test Mode：Clip-on CT，integral mode Display Mode：Four digits LCD display Dimension： Width × Height× Thickness： 175mm×70mm×38mm LCD Dimension：35mm×21.5mm；display domain：32mm×15mm Sampling Rate：about 2 times/s Frequency：50/60Hz Automatically Range Shift：Automatically Accuracy：（23℃±3℃,below 70%RH） 0.00～60.00A: ±1.5%±5dgt 60.00A～199.9A: ±2%±5dgt 200.0A～300.0A: ±4%±5dgt 300.0A～600A: ±4%±5dgt Voltage Range：AC600V RS232 Interface：Data stored in the memory of the meter via RS232 upload to PC, or on-line monitoring Storage：99units，all used when display FULL Peak Hold：Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold：DH indicating the reading is hold Out of Range：OL indicating the current is out of range Auto Power-off：5 Minutes after power on, it will power off automatically to lower the power consumption Consumption：About 5mW Temperature and Humidity：Working: 0℃～40℃,below 80%rh Storage: -10℃～60℃,below 70%rh Insulating Strength：AC2kV/rms (between the alloy of the clamp and the housing) Applicable Safety Rules：IEC1010-1、IEC1010-2-032、pollution, etc 2、CAT Ⅲ(600V)

• ◆ Test Mode：Clip-on CT，integral mode
• ◆ Display Mode：Four digits LCD display
• ◆Accuracy （23℃±3℃, below 70%RH）：0.00～60.00A: ±1.5%±5dgt 60.00A～199.9A: ±2%±5dgt 200.0A～300.0A: ±4%±5dgt 300.0A～600A: ±4%±5dgt
• ◆ Peak Hold：Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold：DH indicating the reading is hold Out of Range：OL indicating the current is out of range
• ◆ Function：Measurement of AC leakage current, AC current and on-line measurement